Low kW Axial Fan
- Quiet operation.
- Corrosion resistant aluminum.
Combined flow, Axial Fan, Induced Draft
BAC’s range of combined flow units, utilise the best in both worlds. By cooling through direct evaporation onto the coil surface as well as through a fill material, before being recirculated back to the sprays.
Multiple fans provide redundancy as well as energy efficiency when working on VSD based controls.
Open internal area provided for ease of access to all components within the unit for maintenance.
High efficiency electrical equipment options as standard provide for a high level of energy efficiency for kW of heat rejected compared to other products.
Spacious Interior - Provides easy access to the cold water basin, drift eliminators, fan drive system and heat transfer coil.
High efficiency coil design and BAC Combined Flow Technology allow for a small coil size. This equates to a smaller refrigerant charge in the condenser and in turn the whole system.
The CXVE combines the use of an evaporative condensing coil with an intergrated fill pack for cooling down the recirculating spray water.
The vapour (1) circulates through a condensing coil (2), which is wetted by a spray system (3). In parallel with the water spray flow, an axial fan (4) draws air (5) over the coil. The evaporation process condenses the vapour into liquid (6). The spray water falls onto a fill pack (7) where it is cooled before falling into the sloping water basin (8) or sump. The spray pump (9) recirculates the cooled water to the top of the unit. The warm saturated air (10) leaves the tower through the drift eliminators (11) which remove water droplets from the air.
For any further information on this product range please feel free to contact us at the link below, or feel free to visit our International Resource Library.